STG-BEIKIRCH 4A - Safety Instructions; Key Safety Warnings; Installation and Operation Guidelines

44
08/13424999756
Safety instructions
Documentation: This documentation is exclusively valid
for the product or product range as stated in the type
designation on the cover and must be applied comprehen-
sively. This technical documentation must be read care-
fully before installation. Follow the guidelines. Contact the
manufacturer if you have any questions or problems. This
documentation should be retained for future reference.
User: This documentation is aimed at trained, professional
electricians with safety awareness, who are familiar with
mechanical and electrical equipment installation, accident
prevention regulations and industrial compensation laws,
and contains important information for operators and
users.
Please observe the following safety instructions
which are emphasized by special symbols.
Caution: Danger to persons due to electricity.
Attention: Danger to persons due to risks arising
from the operation of the equipment. Danger of
crushing/trapping.
Warning: Non-observance leads to destruction.
Danger to material due to incorrect handling.
Important information
Use according to regulations: The product may
only be used for the functions and applications
detailed, and in accordance with the accompanying
documentation. Unauthorised electrical and mechanical
modicationsarenotpermittedandwillinvalidatewarran-
ty and liability.
Transport and storage: The product may only be trans-
ported and stored in its original packaging. It must not be
knocked, dropped, or exposed to moisture, aggressive
vapours or harmful environments. More detailed transport
and storage instructions provided by the manufacturer
must be observed.
Installation: Installation and assembly may only be carried
out by trained professional electricians, in accordance
with the recognised rules of engineering as well as the
technical documentation provided here. This will guaran-
tee that the product will function safely during operation.
Care should be taken that all mechanical components
arexed.Immediatelyafterinstallationtheelectricaland
mechanical components should be checked to ensure
that they function correctly, and the tests and the results
thereof should be documented.
Operation: Safe operation is guaranteed if the accepta-
ble rated values and guidelines regarding maintenance
information stated in this documentation, as well as
supplementary information provided by the manufacturer,
are followed.
Malfunction:Ifamalfunctionisidentiedinthecourse
of installation, maintenance, inspection etc., immediate
action should be taken to rectify the problem.
Repair and maintenance: Defective equipment must
only be repaired by the manufacturer, or by companies
authorised by the manufacturer. Only original spare parts
may be used. Repairs may only be carried out by trained
professional electricians, in accordance with the recognis-
ed rules of engineering as well as the technical
documentation provided here and supplementary advice
from the manufacturer. This will guarantee that the pro-
duct will function safely during operation. Care should be
takenthatallmechanicalcomponentsarexed.
Immediately after repair the electrical and mechanical
components should be checked to ensure that they func-
tion correctly, and the tests and the results thereof should
be documented.
Maintenance: If the product is used as part of a safety
system such as a smoke and heat extraction system
(SHE), it must be tested, maintained and if necessary
repairedatleastonceayearasspeciedbythemanu-
facturer or in line with DIN EN 18232-2 Smoke and heat
control systems for instance. This is also recommended
for systems used purely for ventilation. If the product is
to be used in other safety systems, shorter maintenance
intervals may be necessary. With systems composed of
control units, opening devices, controlsections etc., all
components that interact directly with each other are to
be included in maintenance. Maintenance must be carried
out comprehensively following the manufacturer guideli-
nes and the accompanying documentation. Components
requiring maintenance must be accessible. Defective
equipment must only be repaired by the manufacturer,
or by companies authorised by the manufacturer. Only
original spare parts may be used. All components that
haveaspeciedmaximumoperationtime(suchas
batteries) must be replaced within this time (see technical
specication)withoriginalpartsormanufacturer-approved
parts. Regular inspection is necessary to ensure that the
equipment is ready for operation. A maintenance contract
with a recognised contractor is recommended.
Compact control panel 4A, 4A/M und 8A, 8A/M