Stihl BT 360 User Manual

13BT 360
English
: Observe safety precautions – see
chapter "Safety Precautions".
: Pull the choke knob (1) out
if the engine is cold.
Push the choke knob (1) in
if the engine is warm
(also use this position if engine has
been running but is still cold).
: Move the stop switch (2) away from
"STOP".
Starting throttle position
: Turn the throttle lever (3) with your
left hand until it is in line with the
handlebar.
: Pull the starter grip slowly with your
left hand until you feel it engage –
and then give it a brisk strong pull.
: Do not pull out the starter rope to full
length – it might otherwise break.
: Do not let the starter grip snap back
– guide it slowly and vertically into
the housing so that the starter rope
can rewind properly.
If the engine is new, pull the starter rope
several times to prime the fuel system.
441BA015 KN
1
441BA016 KN
2
441BA017 KN
3
441BA005 KN

Stihl BT 360 Specifications

General

Engine Type	2-stroke
Drill Speed	200 rpm
Sound Power Level	107 dB(A)
Displacement	60.3 cc
Power Output	3.9 kW