Stihl BT 45 - Fuel

14 BT 45
Assembling
: Slide the clutch shoes (1) over
the arms of the carrier (2).
VA
932RA155
2
1
: Hook one end of each spring (1)
to the clutch shoes.
– Use special hook 5910 890 2800
to attach the other ends of the
springs to the clutch shoes.
Installing
VA
932RA156
1
1
1
Install in the reverse sequence
while observing the specified
tightening torques -
b 3.3.
– Remove the fan housing with
rewind starter - b 6.1
– Remove the handle housing
- b 5.1
: Pull off the carburetor along with
the gasket.
– Remove the gearbox - b 9.1
Install in the reverse sequence.
932RA255
VA
Troubleshooting - b 4.4
– Remove the fan housing with
rewind starter - b 6.1
– Remove the right-hand handle
housing - b 5.1
Muffler
: Take out the screws (1) and
remove the muffler (2).
1
2
VA
932RA202
: Remove the exhaust gasket (1).
932RA203
1
VA
5.2.1 Engine 5.3 Muffler/Spark Arresting
Screen