Stihl BT 45 - 10 Special Servicing Tools

40 BT 45
10. Special Servicing Tools
No. Description Part No. Application Rem.
1 Locking strip 0000 893 5903 Blocking the crankshaft
2 Socket 0812 540 1112 Fitting/removing spline socket head
cap screws with electric or pneumatic
screwdriver, releasing clutch drum
3 Socket T 45 5910 890 0105 Releasing/securing chuck
4 Carburetor and crankcase tester 1106 850 2905 Testing crankcase and carburetor for
leaks
5 Nipple 0000 855 9200 Carburetor leakage test
6 Hose for leakage test 1110 141 8600 Carburetor leakage test
7 T-handle screwdriver
Q-SW 8 x 200
5910 890 2420 Carburetor nuts
8 Crimping tool 5910 890 8210 Attaching cable connectors, lugs, etc.
9 Torque wrench 5910 890 0301 0.5 to 18 Nm 1) 2)
10 Torque wrench 5910 890 0311 6 to 80 Nm 1) 3)
11 Socket T 27 x 125 0812 524 2104 Fitting/removing spline socket head
cap screws with electric or pneumatic
screwdriver, tightening to prescribed
torque with torque wrench
12 T-handle screwdriver
Q-T27x150
5910 890 2400 All IS screws 4)
13 Installing tool 5910 890 2204 Installing and flaring the starter rope
guide bush
14 Press arbor 1118 893 7200 Removing and installing ball bearings
15 Hook 5910 893 8800 Removing pickup body
16 Hook 5910 890 2800 Detaching springs from clutch shoes
17 Pliers, DIN 5256-C19 0811 641 8380 Removing and installing internal
circlips/retaining rings
Remarks:
1) Always use torque wrench to tighten DG or P screws.
2) Alternative: Torque wrench 5910 890 0302 with optical/acoustic signal.
3) Alternative: Torque wrench 5910 890 0312 with optical/acoustic signal.
4) Only use for releasing/removing DG or P screws.