Stihl BT 45 - Spacer Flange; Servicing; Manual Fuel Pump

25BT 45
– Remove the air filter - b 8.1
– Remove the handle housing
- b 5.1
: Pull away the carburetor with the
gasket behind it.
932RA255
VA
: Take out the screws (1) and pull
the spacer flange with hex head
screws (2) out of the air baffle.
VA
932RA256
1
2
: Pull the air baffle (1) out of the
guide (arrow) on the spiral
housing and remove it.
VA
932RA257
1
: Pull gasket (1) out of the guides
(arrows) on the spiral housing
and lift it away.
Install in the reverse sequence.
Use new gaskets and observe
tightening torques - b 3.3.
1
VA
932RA258
: Take out the screws (1).
– Remove the end cover with cap.
VA
936RA023
1
: Take the cap out of the end cover.
VA
932RA285
: Remove the flange.
VA
936RA024
8.3 Spacer Flange 8.4 Servicing
8.4.1 Manual Fuel Pump