Need help?Do you have a question about the Stihl FT 250 and is the answer not in the manual?
Explains symbols used in the manual and on the machine for operation guidance.
Defines the meaning of warning and caution symbols used within the text.
Details required personal protective equipment for safe operation, including clothing, footwear, eye, and hearing protection.
Outlines crucial safety steps and procedures for refueling the machine to prevent fire hazards.
Lists essential checks to perform on the machine and its components before starting operation.
Step-by-step guide on safely starting the engine, emphasizing proper placement and clearing the area.
Key operational guidelines and safety advice for using the power tool effectively and safely.
Details the specific use and limitations of the circular saw blade for cutting shrubs.
Step-by-step guide for assembling the handlebar onto the drive tube and support.
Explains the importance of proper throttle cable adjustment for correct operation and idle settings.
Explains the procedure to block the drive shaft for safe attachment mounting and removal.
Guidance on correctly fitting and tightening the nut for securing the cutting attachment.
Provides essential information and warnings regarding fuel mixing ratios and the use of unsuitable fuels.
Recommends high-quality two-stroke engine oils, preferably STIHL branded, for engine longevity.
Instructions on how to safely fill the fuel tank, avoiding spills and overfilling.
Step-by-step instructions for attaching the machine to the shoulder strap using carabiners.
Step-by-step guide to starting the engine, including choke and throttle settings.
Instructions on how to attach the transport guard to the saw blade.
Recommendations for engine operation after extended periods of use to prevent thermal overload.
Procedures for cleaning, oiling, and installing the foam air filter.
Troubleshooting guide for when the engine stops during idling, focusing on idle speed screw adjustment.
Specific instructions for correcting when the saw blade rotates at idle.
Procedures for inspecting the spark plug for fouling and proper function.
Detailed instructions for replacing the starter rope and its associated components.
Annual procedure for replacing the fuel pickup body to ensure proper fuel delivery.
Lists components of the power tool that are subject to normal wear and require timely replacement.
To Next Page
General
