What to do if my Stihl MH 700 engine is overheating?
If your Stihl Tiller engine is overheating, several factors could be responsible. Dirty cooling ribs can cause overheating, so clean them. Also, check the engine oil level and top it up if it's too low. Earth covering the engine surface can also lead to overheating, so remove any earth. Finally, reduce the engine speed if it is too high.
Why is my Stihl Tiller smoking so much?
If your Stihl Tiller produces heavy smoke, it could be due to several reasons. First, check the oil level in the engine and drain any excess oil if it's too high. Also, inspect the oil bath air filter and clean or replace it if it's dirty. Finally, ensure the tiller is positioned horizontally, as an inclination of over 15° can also cause heavy smoke.
Why is my Stihl Tiller engine running roughly?
If your Stihl Tiller engine is running roughly, the first thing to check is the oil bath air filter and clean or replace it if it's dirty. Also, verify that you're using the correct fuel and refill the fuel tank if the level is low.
What to do if my Stihl Tiller is not working?
If your Stihl Tiller is experiencing faults, start by checking the fuel level and refueling if necessary. Ensure the main switch is properly pressed. Replace old or dirty fuel with fresh, high-quality unleaded petrol, and clean the carburetor and fuel line. Also, check the spark plug socket and ignition lead connections, clean or replace the spark plug, adjust the electrode gap if needed, and clean or replace the oil bath air filter.
Covers warning symbols, intended use, and user requirements for safe operation.
Explains safe tiller condition checks and rotor blade safety.
Provides critical safety instructions for handling and refueling the tiller with petrol.
Guidance and warnings for operating, transporting, and storing the tiller safely.
Outlines safety precautions for all cleaning, maintenance, and repair tasks.
Details on how to properly top up gearbox and engine oil.
Provides step-by-step instructions for safe refueling of the tiller.
Step-by-step instructions for starting and stopping the tiller's engine.
Details how to engage and disengage the tiller's self-propulsion system.
Outlines recommended maintenance schedules and gearbox lubrication.
Details on checking and changing the gearbox oil level.
A comprehensive guide to diagnosing and fixing common tiller problems.
Covers essential preparatory steps and safety during maintenance/storage.
To Next Page
General
