Stihl RE 100 PLUS CONTROL - Spray Gun and Lance

0458-004-0121-A
17
English 6 Assembling the pressure washer
6.3.2 Removing the spray gun
► Press and hold the locking lever (1).
► Pull out the connector (2).
6.4 Attaching and removing the spray lance
6.4.1 Attaching the spray lance
► Push spray lance (1) into spray gun (2).
► Twist the spray lance (1) until it engages.
► If the spray lance (1) cannot be pushed easily into the
spray gun (2): Grease the gasket on the spray lance (1)
with grease for fittings.
6.4.2 Removing the spray lance
► Squeeze spray lance (1) and spray gun (2) together and
twist as far as they will go.
► Pull spray lance (1) and spray gun (2) apart.
6.5 Attaching and removing the nozzle
6.5.1 Attaching the Nozzle
► Push nozzle (1) onto the spray lance (2).
► Turn the nozzle (1) until it engages
► If the nozzle (1) cannot be pushed easily into the spray
lance (2): Grease the gasket on the nozzle (1) with grease
for fittings.
2
1
0000097567_002
0000-GXX-4350-A0
1
2
0000-GXX-4351-A0
2
1
2
1
0000099069_001