EasyManua.ls Logo

Stihl RE 80 - High Pressure Washer STIHL RE 80.0 X; Lubricating the Seals; Specifications

Stihl RE 80
188 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0458-001-9621-A
68
English
19 Specifications
18.2 Lubricating the seals
Grease the seals (1) with grease for fittings.
19.1 High pressure washer STIHL RE 80.0 X
Version 100 V / 50-60 Hz
Fuse (characteristic "C" or "K"): 15 A
Power consumption: 1.4 kW (EU) 2019/1781 §2(2) (j)
Maximum permitted network impedance: 0.15 Ohm
Protection class: II
Degree of of electrical protection: IPX5
Working pressure (p): 6.7 MPa (67 bar)
Max. permissible pressure (p max.): 10 MPa (100 bar)
Max. water supply pressure (p in max.): 1 MPa (10 bar)
Max. water throughput (Q max.): 7.5 l/min (450 l/h)
Minimum water throughput (Q min.): 5.4 l/min (320 l/h)
Max. suction lift: 0.5 m
Max. water temperature in pressure mode (t in max):
40 °C
Max. water temperature in suction mode: 20 °C
sample inspection
Length: 250 mm
Width: 270 mm
Height: 430 mm
Length of high-pressure hose: 5 m
Weight (m) with accessory attached: 7 kg
Version 120 V - 127 V / 60 Hz
Fuse (characteristic "C" or "K"): 15 A
Power consumption: 1.5 kW (EU) 2019/1781 §2(2) (j)
Maximum permitted network impedance: 0.15 Ohm
Protection class: II
Degree of of electrical protection: IPX5
Working pressure (p): 7.2 MPa (72 bar)
Max. permissible pressure (p max.): 10 MPa (100 bar)
Max. water supply pressure (p in max.): 1 MPa (10 bar)
Max. water throughput (Q max.): 7.2 l/min (430 l/h)
Minimum water throughput (Q min.): 5.5 l/min (330 l/h)
Max. suction lift: 0.5 m
Max. water temperature in pressure mode (t in max):
40 °C
Max. water temperature in suction mode: 20 °C
sample inspection
Length: 250 mm
Width: 270 mm
Height: 430 mm
Length of high-pressure hose: 5 m
Weight (m) with accessory attached: 7 kg
Version 127 V / 60 Hz
Fuse (characteristic "C" or "K"): 15 A
Power consumption: 1.5 kW (EU) 2019/1781 §2(2) (j)
Maximum permitted network impedance: 0.15 Ohm
Protection class: II
19 Specifications
1
1
1
0000098483_001

Table of Contents

Related product manuals