0458-814-8221-A
25
English
11 During Operation
Activating the spray gun trigger
To pull the spray gun trigger:
► Slide the retaining latch (1) to the position.
► Press and hold the spray gun trigger (2).
The high-pressure pump starts up automatically and water
flows out of the nozzle.
Locking the spray gun trigger
To lock the spray gun trigger:
► Release the spray gun trigger (2).
The high-pressure pump switches off automatically when
you release the spray gun trigger. Water stops flowing out
of the nozzle but the pressure washer remains switched
on.
► Slide the retaining latch (1) to the position to lock the
spray gun trigger.
11.2 Adding Detergents
WARNING
Use of unsuitable detergents or cleaning agents can cause
personal injury and damage the pressure washer and/or the
surface being cleaned. Always use detergents in the dosage
specified in the detergent manufacturer's instructions for
proper preparation and dilution, as well as safe use and
disposal.
Detergents can improve the cleaning effect of water.
Use the detergent spray set to add detergents:
► Always read and follow instructions provided by the
manufacturer of the detergent before starting work.
► STIHL recommends soaking surfaces with water before
applying detergent.
► Fill the detergent bottle (1) with up to 16.9 oz. (500 ml) of
detergent.
► Screw the detergent nozzle (2) onto the detergent bottle
and tighten firmly by hand.
0000-GXX-4360-A0
1
2
0000-GXX-4345-A0
2
1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
