Stihl RM 650 V - Transporting Lithium-Ion Batteries; REACH; Troubleshooting

0478 111 9953 B - EN
68
Transporting lithium-ion batteries:
RM 650 VE: The battery is subject to the
requirements for transporting hazardous
goods. The battery is classed as a
UN 3480 (lithium-ion battery) and has
been tested in accordance with the UN
Manual of Tests and Criteria, Part III,
subsection 38.3.
The user may carry these batteries to the
place of use of the machine without further
restrictions during road transport.
Country-specific legislation must be
observed in the case of air or sea
transport.
For further transport instructions, see
http://www.stihl.com/safety-data-sheets
20.1 REACH
REACH is an EC Directive for the
registration, evaluation, authorisation and
restriction of chemicals.
Information on compliance with the
REACH Directive (EC) No. 1907/2006 is
available from www.stihl.com/reach.
Fault:
Engine not starting
Possible cause:
– RM650T, RM650V, RM650VE,
RM 655 V: Motorstop lever not
pressed.
– RM650VS, RM655RS, RM655VS,
RM 655 YS: Throttle lever is in Stop
position.
– RM 650 VE: Battery discharged or
defective.
– No fuel in tank; fuel line blocked.
– Inferior, dirty or old fuel in tank.
– Air filter dirty.
– Spark plug socket detached from spark
plug; ignition lead not properly fastened
to socket.
– Spark plug dirty or damaged; incorrect
electrode gap.
– Lawn mower housing blocked.
Design 4-stroke com-
bustion engine
Manufacturer, type Kohler HD775
Displacement 173 ccm
Starter Rope start
Nominal output at
nominal speed
2,6 - 2800
kW - rpm
Fuel tank 1,4 l
Sound emissions
Measurement in accordance with
2000/14/EC / S.I. 2001/1701:
Guaranteed sound
power level L
WAd
98 dB(A)
Uncertainty K
WA
1,2 dB(A)
Measurement in accordance with EN ISO
5395-2
Sound pressure level
at workplace L
pA
84 dB(A)
Uncertainty K
pA
2 dB(A)
Hand-arm vibrations
Specified vibration characteristic in
accordance with EN 12096:
Measured value a
hw
3,80 m/sec²
Uncertainty K
hw
1,90 m/sec²
Measurement in accordance with EN ISO
5395-2, EN 20643
RM 655.0 YS:
Cutter bar drive BBC
Self-propulsion, rear
wheels
Hydrostatic
gearbox
Weight 56 kg
Engine
Design 4-stroke com-
bustion engine
Manufacturer, type Kawasaki
FJ 180 V KAI
Displacement 179 ccm
Starter Rope start
Nominal output at
nominal speed
2,9 - 2800
kW - rpm
Fuel tank 1,6 l
Sound emissions
Measurement in accordance with
2000/14/EC / S.I. 2001/1701:
Guaranteed sound
power level L
WAd
98 dB(A)
Uncertainty K
WA
1,0 dB(A)
Measurement in accordance with EN ISO
5395-2:
Sound pressure level
at workplace L
pA
84 dB(A)
Uncertainty K
pA
2dB(A)
Hand-arm vibrations
Specified vibration characteristic in
accordance with EN 12096:
Measured value a
hw
3,00 m/sec²
Uncertainty K
hw
1,50 m/sec²
Measurement in accordance with EN ISO
5395-2, EN 20643
21. Troubleshooting
 If necessary, contact a specialist
dealer; STIHL recommends STIHL
specialist dealers.
@ See engine instruction manual.