TS 480i, TS 500i
English
47
Antivibration elements
Test, check XXX
Have them replaced by a servicing
dealer
1)
X
Abrasive cutting wheel
Test, check XX
Replace XX
Supports/rubber buffers (underneath the
machine)
Test, check X
Replace XX
Warning labels Replace X
1)
STIHL recommends authorized STIHL servicing dealers
The following maintenance intervals apply in normal operating conditions. The
specified intervals must be shortened accordingly when working for longer than
normal or under difficult cutting conditions (extensive dust, etc.).
Before starting work
At the end of work and/or
daily
Whenever tank is refilled
Weekly
Monthly
Yearly
If not functioning properly
If damaged
As required
To Next Page
Loading...
