What to do if the STIHLER ELECTRONIC Heater shows a sensor defect alarm?
If the STIHLER ELECTRONIC Heater's sensor is defective due to sensor issues, a faulty connection cable, a defective cable plug, a defective extension connection cable, or a defective connecting socket on the control unit, you should send the applied part or the control unit to the local sales point. If the extension connection cable is defective, replace it.
What to do if my STIHLER ELECTRONIC Heater has an overheating alarm shut-off?
If the STIHLER ELECTRONIC Heater is overheating and shutting off (A4 alarm), and the set temperature was increased causing an overshoot, or if an external heat source is influencing the applied part, you should: 1. Switch off the control unit with the Standby button. 2. Allow the applied part to cool. 3. Restart the heating process. Also, remove any external heat source. If the applied part is defective, send it to the local sales point.
What to do if my STIHLER ELECTRONIC Heater shows a heating defect alarm?
If the STIHLER ELECTRONIC Heater displays a heating defect alarm (A6), it could be due to high or low heater resistance, a defective connection cable, a defective cable plug, a defective extension connection cable, or a defective connecting socket. Send the applied part or the control unit to the local sales point. If the extension connection cable is defective, replace it.
Why does my STIHLER ELECTRONIC Heater show a low temperature alarm?
If the STIHLER ELECTRONIC Heater shows a low temperature alarm (A1), it might be because the applied part is being cooled by environmental conditions. Stop the cooling process. If the applied part is defective, send it to the local sales point.
What to do if my STIHLER ELECTRONIC ASTOPAD DUO310 Heater has an overheating alarm?
If the STIHLER ELECTRONIC Heater is showing an overheating alarm (A2), it might be due to a lowered set temperature (cooling phase - no action needed), an external heat source, or a defective applied part. Remove the heat source. If the applied part is defective, send it to the local sales point.
What to do if my STIHLER ELECTRONIC ASTOPAD DUO310 Heater displays a time alarm?
If the STIHLER ELECTRONIC Heater displays a time alarm (A3), it may be caused by a layer of thermally conductive materials (like water or gel) on the applied part. Remove the pad or place it underneath the applied part. If the applied part is defective, send it to the local sales point.
What to do if my STIHLER ELECTRONIC ASTOPAD DUO310 Heater shows a battery status problem?
If your STIHLER ELECTRONIC Heater, which uses a battery, indicates a battery status issue, it may be due to a defective battery or the insertion of a non-original battery. Insert a new original battery.
General| Brand | STIHLER ELECTRONIC |
|---|---|
| Model | ASTOPAD DUO310 |
| Category | Heater |
| Language | English |
To Next Page