STIHLER ELECTRONIC ASTOPAD DUO310 - Switching off an Output (a or B)

ASTOPAD
®
Instructions for Use
7 Operating states
30
7.5 Switching off an output (A or B)
Control panel
Action
Press the Stop button (7) to switch off an output.
Device
response
 The Start LED (6) goes out.
 Displays (1) and (2) go off for the output that was switched
off.
 If only one output is active, pressing the Stop button (7) will
deactivate the heating process of this output and activate
the self-test.
 Pressing the Start button (6) can reactivate the heating pro-
cess with the last set temperature setting (2).
 Press the Standby button (9) to switch the equipment into
Standby mode.