– Turn off the truck and perform the prelimi-
nary maintenance operations.
– Raise the battery compartment cover (1).
– Disconnect the plug from the socket (2), po-
sitioning it as shown in the label (3)
CAUTION
Do not place the plug on the battery.
– Remove the panel (5), inserting a hand into
the handhold (6).
– Place the manufacturer-approved battery
side removal roller unit next to the truck; po-
sition it so that it is still and stable; adjust
the height of the roller unit so that it is level
with the underside of the battery at the bat-
tery compartment.
– Remove the battery holddown (4).
– Lift the battery stop (7).
DANGER
"Risk of crushing hands!" The battery must be re-
moved by a single operator only. The operator
must follow the operating instructions given in this
section, positioning himself on the same side as the
battery side removal roller unit.
– Pull the battery towards the outside, sliding
it along the rollers on the truck and position-
ing it on the previously prepared external
roller unit. For further information, refer to
the "stand with side battery removal roller
unit" section.
Maintenance
5
Maintenance as required
66 45628043302 EN - 11/2021 - 07
To Next Page
Loading...
