– Hook the battery at the two points (8) with a
sling or chain.
– Lift the battery and remove it.
DANGER
Use a crane with a suitable lifting capacity for the
weight of the battery. The lifting operations must be
performed by qualified personnel. DO NOT stand
within the crane's radius of action or near the truck.
Use NON METALLIC slings. Make sure that the lift-
ing capacity of the slings is suitable for the weight
of the battery.
– Change the battery and refit it by following
the above steps in the reverse order.
NOTE
To decide which type of battery to use, check
the battery characteristics provided in the
"TECHNICAL DATA" chapter.
CAUTION
When closing the battery cover, take care to position
the cables of the battery plug correctly so as not to
damage them.
NOTE
After having positioned the battery holddown
(4) and battery stop (7), check that there is lit-
tle or no clearance between it and the battery
compartment.
2028
8
8
Maintenance
5
Maintenance as required
6745628043302 EN - 11/2021 - 07
To Next Page
Loading...
