Storage Options Home CCTV Kit - Alarm Configuration

Page 33
8.2 – ALARM
The Alarm menu can be used to configure alarm and e-mail settings.
NOTE
External alarm devices must be connected to the alarm block on the rear panel of the DVR in order to use
the I/O alarms of the system.
To configure alarm settings:
1. Under ALARM MANAGE POST REC, select the amount of time the DVR should record for after an alarm event
has occurred.
2. For EMAIL SETUP, refer to section “8.3 – E-Mail Setup” (page 34).
3. Click APPLY to save changes, then EXIT to close the menu.