Cleaning
Stainless steel surfaces (stainless
steel
finish models only)
FACIA
PANEL,
HANDLES
Only
use
a clean cloth wrung out in hot
soapy water, and
dry
with a soft cloth.
Stubborn marks can be removed using
"Luneta".
We
recommend that you
clean the whole
of
the stainless steel
area to maintain a uniform finish.
Supplies can be purchased from the
Customer Care Centre.
Do not
use
undiluted bleach
or
any
products containing
c~llorides
as
they
can permanently damage the steel.
Extra care should be taken when
cooking food in salted water. Some
foods are corrosive - eg; vinegar, fruit
juices
and especially salt - they can
mark
or
damage
stainless steel
if
they
are left on the surface. Turn
off
and
wipe
any spillage immediately, taking
care to avoid skin contact with any hot
surface
or
spillage.
Sharp objects can mark the surface
of
stainless steel, but marks will become
less
noticeable with time.
To
maintain the finish
of
the stainless
steel, or
to
remove any greasy marks,
wipe
the stainless steel surface
sparingly with a
minimum amount
of
"Johnson's Baby
Oil"
and kitchen
paper. Do not
use
cooking oils, as
these may contain salt, which can
damage the stainless
steel
surface.
23
To Next Page
Loading...
