Wallrack User Manual
Set minimum level
Press Down button five times to go to Minimum Level menu. Press Right
button to enter.
Use Up/Down buttons to select all or channels (24 ways: 1- 24, 6 ways: 1-
6). Press the Right button to set the level.
Use Up/Down buttons to select a minimum level between 0 - 30. Use the
Right button to enter. Repeat as necessary to set other channels.
Press OK to confirm changes, press OK again to save or press Esc to exit
without saving any changes.
User Manual v1.2 March 2006 18
To Next Page
Loading...
