Wallrack User Manual
Set maximum level
Press Down button six times to go to Maximum Level menu. Press Right
button to enter.
Use Up/Down buttons to select all or channels (24 ways: 1- 24, 6 ways: 1-
6). Press the Right button to set the level.
Use Up/Down buttons to select a maximum level between 70 - 100. Use
the Right button to enter. Repeat as necessary to set other channels.
Press OK to confirm changes, press OK again to save or press Esc to exit
without saving any changes.
User Manual v1.2 March 2006 19
To Next Page
Loading...
