Stratus ftServer 4900 Series - Chapter 4 Communications Line Planning

Communications Line Planning 4-1
Chapter 4
Communications Line Planning
4-
Make sure that you plan the locations of your ftServer system and its external
components so that all communications and data cables will reach their connection
points.
This chapter contains the following sections:
 “Supported Host Bus Adapters” on page 4-2
 “Supported Storage Systems” on page 4-2
 “Connections from Storage Systems to ftServer Systems” on page 4-3
 “Ethernet Cables” on page 4-5
 “Telephone Line Connections” on page 4-9
NOTES
1. If you have a unique network requirement, contact the
Stratus Customer Assistance Center (CAC) or your
authorized Stratus service representative. For more
information about the CAC, see “Getting Help” in the
Preface or the http://www.stratus.com/go/support
web site.
2. See the Stratus ftServer Systems: PCI Adapter
Guide (R461) for more information about the
adapters Stratus supplies for your ftServer system.