Stratus ftServer 4900 Series - Peripheral Components for Vmware Vsphere-Based Systems; Table 7-5. PCI Adapters and Peripheral Components: Vmware Vsphere-Based Systems; Table

Peripheral Components for VMware vSphere-based Systems
Site Planning for Peripheral Components 7-5
Peripheral Components for VMware vSphere-based Systems
Tabl e 7- 5 lists the PCI adapters required for each peripheral component on ftServer
systems running Automated Uptime Layer for VMware vSphere-based ftServer
Systems.
To plan a site for a system on which Automated Uptime Layer for VMware
vSphere-based ftServer Systems is installed, see the previous chapters in this manual.
Also, see the following manuals:
 The ftScalable Storage G3: Getting Started Guide (R687) for information about
connecting ftScalable Storage G3 systems to ftServer systems
 Using ftScalable Storage G4 Systems (R789) for information about connecting
ftScalable Storage G4 systems to ftServer systems
 The Stratus ftServer Systems: PCI Adapter Guide (R461) for detailed information
about the PCI adapters
For additional information about third-party peripheral equipment that has been tested
with ftServer systems, see the following web site:
http://stratadoc.stratus.com/genref/refsell/qualified_equipment.html
Table 7-5. PCI Adapters and Peripheral Components: VMware vSphere-based Systems
Components PCI Adapter
Fibre Channel ftScalable Storage G3 or ftScalable
Storage G4 systems, and ftServer 2900, 4900, or 6900
systems
U112A Single-Port 16-Gbps Fibre
Channel PCI-Express Adapters
iSCSI ftScalable Storage G3 or ftScalable Storage G4
systems, and ftServer 2900, 4900, or 6900 systems
Embedded Ethernet adapters
U113 Dual-Port 10/100/1000 Base-T
Ethernet PCI-Express Adapters
U117A Dual-Port Fiber
10-Gbps Ethernet PCI-Express
Adapter
†
U118 Dual-Port RJ-45 10-Gigabit
Ethernet PCI-Express Adapter
† Supported only in ftServer 4900 and 6900 systems with the PCI-Express (PCIe) riser assembly.