Strider MX 3 - Setting Up the Strider; Adjusting Seat Height

21
Issued: 24.02.2005
STRIDER MX
The following passage describes how to set up your Strider in order to
ensure that you have a comfortable and safe drive.
Tilt the backrest forwards.
First pull out the locking device (1) and
then fold the backrest forward (2).
➨
NOTE!
The seat must be removed from the
Strider in order to adjust the seat
height. You should try to get help from
a second person if possible or contact
your dealer.
Removing the seat
Removing the seat:
Lift the seat while pulling the seat lock
(3) out of the seat support (4).
➨
Tilt the backrest
forwards
Adjusting the seat height
Pull the rear panelling off the Strider
upwards.
➨
Removing the rear
panelling
Removing the rear panelling:
6.0 Setting up the Strider
6.1 Adjusting the seat height