EasyManua.ls Logo

Strider MX 3 - Preselecting Drive Level; Adjusting Driving Speed

Strider MX 3
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
Issued: 24.02.2005
STRIDER MX
Driving the Strider
Speed controller
Adjust the required maximum driving
speed by turning the speed controller.
Your maximum driving speed can be variably adjusted using
the speed controller.
Controller symbols:
Maximum driving speed = drive lever pressed as far as stop
= lowest possible maximum driving
speed for the required drive level
= highest possible maximum driving
speed
NOTE
Use the adjustment facilities to adjust the speed to suit
local conditions.
Select a lower speed if you are driving through narrow
gaps, on inclines or through crowds.
You can use the drive level selection
switch to set the maximum driving speed
to 6 kph (4 mph) and 12 kph (8 mph).
Drive levels:
H = 12 kph (8 mph) maximum driving speed
L = 6 kph (4 mph) maximum driving speed
Move the toggle switch to setting H or L
to adjust the required maximum driving
speed.
Selecting the drive level
8.5 Adjusting the speed
8.5.1 Preselecting the drive level
8.5.2 Adjusting the speed

Table of Contents

Related product manuals