EasyManua.ls Logo

Strider MX 3 - Charging the Batteries; Preparing the Battery Charger

Strider MX 3
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
Issued: 24.02.2005
STRIDER MX
Please also see the information given in the chapter entitled “Things to
know“.
12.0Charging the batteries
Charging information:
The surrounding temperature should be between 10° and 30° Celsius.
The charging time will increase at lower temperatures.
Only use the original battery charger (included in delivery).
Only use the battery charger in a dry and well-ventilated room.
Do not cover the battery charger and ventilation slot while charging
batteries.
The battery charger has an automatic switch-off device which
prevents overcharging the batteries. Do not leave the battery
charger connected to the scooter for more than 24 hours.
- The batteries can be charged overnight.
Switch the Strider off before charging the batteries.
Charging the batteries
When is charging required?
the battery charge display is in the red area
after the final journey of the day
at least once per week
Charging times:
Between 8 and 14 hours depending on current battery charge state.
12.1 Preparing the battery charger
Plug the mains cable plug (1) into the
jack socket (2) on the battery charger.
Connect the mains cable
NOTE
The battery charger is designed to be
able to charge completely discharged
batteries within eight hours to 80% of
their capacity.

Table of Contents

Related product manuals