Strider MX 3 - Page 80

To Next Page

To Previous Page

Issued: 24.02.2005

STRIDER MX

Place the washer (8).➨

Locating the washer

Securing the rear wheel

Repairs - mechanics

Press the protective cap onto the

wheel fixing nut.

➨

Screw the wheel fixing self-locking nut

(9) and tighten it (size 19 mm).

Lower the Strider.

Tighten the self-locking nut.

➨

Main Page

Default Chapter4
- Table of Contents4
1 Safety Instructions8
- Intended Use8
- S T R I D E R M X8
- Symbols Used8
- General Information9
- Safety When Driving10
- Safety During Transport, Assembly and Maintenance11
- Safety - Information about Electronics12
- Safety When Handling Batteries12
2 Versions13
3 Extent of Delivery13
4 Components14
- The Strider14
- The Dashboard - Displays and Controls14
5 Brief Instructions15
- Driving the Strider15
- Transporting the Strider19
6 Setting up the Strider21
- Adjusting the Seat Height21
- Adjusting the Seat Position25
- Adjusting the Headrest Hight27
- Adjusting the Tiller Angle28
7 Information about Safe Strider Driving29
- Driving up Inclines and down Slopes29
- Overcoming Obstacles30
  - Driving Information - Overcoming Kerbs32
- Overload Protection - Motor Protection33
- Battery Charging State = Driving Range34
8 Driving the Strider37
- Getting on and off37
- Seat Belt - Adjusting for Length and Putting on38
- Turning the Seat39
- Switching the Strider on39
  - Operation Indicator and Fault Display39
  - S T R I D E R M X39
- Adjusting the Speed40
  - Preselecting the Drive Level40
- Before Driving41
- Driving41
- Brakes42
  - Using the Motor Brake42
  - Using the Handbrake42
- Indicating42
- Switching on the Headlights43
- Using the Horn43
- Switching off / Parking the Strider43
  - The Wheel Lock (4-Wheel Version Only)44
9 Hazard Lamps44
10 Pushing the Strider45
11 Attaching the Shopping Basket45
12 Charging the Batteries46
- Preparing the Battery Charger46
- Charging the Batteries47
- After Charging48
13 Things to Know49
- The Battery Charger - Functioning Principle49
- The Batteries49
- The Auto Switch-Off50
- The Drive Unit50
- The Drive50
- The Control Unit50
- Lighting51
- Anti Tipping Wheels51
- Wheels and Tyres52
- Brakes on the Strider52
  - The Motor Brake52
  - The Handbrake52
- Driver´s Licence53
- Insurance53
- S T R I D E R M X53
14 Transporting the Strider54
- Transport Information54
- Transporting the Complete Strider (3 Wheel Version)54
- Preparation for Transport - Separating Component (4 Wheel Version)54
- After Transport - Reassembly59
15 Cleaning64
16 Maintenance and Inspection65
- Daily Maintenance before Start of Journey65
- Weekly Inspections / Tyre Pressure65
- Annual Inspection - Inspection Timetable66
17 Troubleshooting70
- Before Troubleshooting70
18 Repairs74
- Information about Safety at Work74
- Tools74
- Mechanics75
- Lighting - 3 Wheel Version84
- Lighting - 4 Wheel Version86
- Fuses89
- Batteries92
  - Disposal of Used or Damaged Batteries92
  - Refitting Battery Cables93
20 Appendix94
- Nameplate94
- Specifications95
- Torque for Fixing Screws98
- Disposing of the Scooter98
19 Temporary Storage94
21 Warranty Information99
22 Annual Inspections Carried out100

Strider MX 3 - Page 80

Table of Contents

Related product manuals