Strong Digital Satellite Receiver User Manual

1
Digital Satellite Receiver
USER’S MANUAL

Strong Digital Satellite Receiver Specifications

General

Input Frequency	950 - 2150 MHz
Input Level	-65 to -25 dBm
LNB Power	13/18V, 500mA max
Demodulation	QPSK
Video Decoding	MPEG-2
Audio Decoding	MPEG-1 Layer 1, 2
Power Supply	100~240V AC 50/60Hz

Summary

Safety Instructions

Main Supply Precautions

Details power supply requirements and safety checks for the unit.

Overloading Prevention

Advises against overloading outlets to prevent fire or electric shock.

Liquid Exposure Warning

STB should not be exposed to liquids or have liquid-filled objects placed on it.

Cleaning Guidelines

Instructions for safe cleaning using a soft-dry cloth only.

Ventilation Requirements

Ensures proper airflow by maintaining distance and avoiding obstructions.

Attachment Safety

Warns against using non-recommended attachments that may cause hazard.

Safety Instructions - Connections and Location

LNB and TV Connection Safety

Disconnect power before connecting/disconnecting LNB and TV cables.

Earthing Requirement

The LNB cable must be earthed to the system earth for the satellite dish.

Indoor Location and Climate

Place STB indoors, away from direct elements and in moderate climates.

Battery Handling and Disposal

Proper disposal of batteries due to toxic agents, follow regulations.

General Introduction

User Manual Purpose and Remote Control

Explains manual's role in learning STB functions and remote control design.

Software Warning

Advises using only official software to avoid warranty voidance.

General Introduction - Unpacking

Package Contents Checklist

Lists all items included in the STB packaging for user verification.

Front Panel Description

Front Panel Controls

Details the power and channel/menu navigation buttons on the front panel.

Rear Panel Description

Rear Panel Connections and Functions

Identifies rear panel ports (LNB, RS-232, AV, RF OUT, POWER) and their uses.

Remote Control Unit

Remote Control Layout

Visual overview of the remote control buttons and their general layout.

Remote Control Functions

Power, Mode, and Volume Control

Buttons for standby, mute, audio, volume, pause, and timer.

Menu Navigation and Selection

Buttons for numeric input, page up/down, channel selection, and confirmation.

Menu Access and Program Management

Buttons for accessing main menu, exiting, and managing favorite programs.

Information and Display Features

Buttons for info, TV/Radio switch, recall, multi-picture, and zoom.

Operation - Satellite Setup

Satellite Menu Overview

Navigating the satellite menu for antenna and function setup.

Adding New Satellites

Procedure for adding and renaming preferred satellites.

Operation - Satellite Management

Editing and Deleting Satellites

Steps for editing satellite details and removing them from the list.

Blind Scan for Channels

Performing an automatic channel search using blind scan.

Operation - Channel Scanning and Lists

Auto Scan Procedure

Performing automatic channel scan after satellite selection.

TV Channel List Navigation

Browsing and selecting channels from the TV list.

Operation - Program Lists and Editing

Radio Channel List

Displaying and navigating the radio channel list.

Favorite Channel Lists

Organizing TV and Radio channels into favorite groups.

Program Editing Functions

Overview of editing, moving, and deleting programs.

Operation - Program Management

Selecting and Moving Programs

Choosing favorite programs and repositioning them.

Deleting and Locking Programs

Removing programs or restricting access with a lock.

Program Editing Details

Renaming channels and modifying PID values.

Transponder Management

Adding transponders with frequency, symbol rate, and polarization.

Operation - Transponders and System Settings

Transponder Editing and Deletion

Modifying and removing transponder entries.

Manual Transponder Scan

Scanning channels using specific transponder data.

System Configuration

Setting TV standard, language, and factory defaults.

System Software Update

Procedure for updating the STB's system software.

Operation - System and Tools

OSD and Picture Settings

Customizing On-Screen Display and picture characteristics.

Version Information and Parental Lock

Checking firmware version and setting parental control.

Calendar and Date Access

Using the built-in calendar for date information.

Operation - Built-in Games

Playing the Russion Game

Instructions for playing the classic Russion game.

Playing the Snake Game

Instructions for playing the classic Snake game.

Software Update Procedure

Required Devices for Update

Lists the computer, receiver, and cable needed for software updates.

Step-by-Step Update Operation

Detailed instructions on connecting, launching, and executing the software update.

Troubleshooting Common Issues

No Display or 'No Signal' Error

Resolves issues related to power, signal, and LNB connection.

Audio Problems and Setup Errors

Addresses strange audio and incorrect program setup issues.

Troubleshooting Tips and Support

Provides general advice and directs users to support for unresolved issues.

Glossary of Technical Terms

Technical Definitions (A-D)

Explains terms like 22KHz switch, Antenna, CVBS, DiSEqC, LNB, NTSC, PAL.

Glossary - Continued

Technical Definitions (P-T)

Defines terms such as PID, Polarization, RF, STB, Symbol Rate, Transponder, Transport Stream.

Product Specifications

Tuner and Demodulator Specifications

Details input frequency, signal level, impedance, LNB power, and demodulation.

MPEG Transport Stream Specifications

Covers input rate, video, audio, resolution, and sampling frequency.

Connector Types

Specifies LNB IF, RCA, and Serial Port connector types.

Power Supply and Physical Specs

Details input voltage, consumption, weight, and operating temperatures.