14
Operation
Press ◄/► to page up and down
Press OK to delete the highlighted satellite
Press “Menu” to exit and it will disappear:” Do you want to save?” Press OK to
save or cancel to exit.
If the satellite you want to scan is not saved in software. It is necessary to add a
new satellite in Satellite manager menu, before blind scan.
1.5 Auto Scan
Press ▼ move the cursor to “Auto Scan”
and press OK on the remote control to
enter into the sub-menu.
Choose the satellite you want to scan,
and press ok to start.
If there are no new channels found, it will
not store on the STB. It states:” Can’t find
new program!”
2. Prog List
Under the Program list menu, you can
choose the TV and Radio channels as
you wish.
2.1 TV List
Press ▲/▼ to select the channels Press ◄/► to page up and down
Press OK to enter into the full screen to play
Press “Menu” to show the existing satellites under channels.
.
To Next Page
Loading...
Need help?
General
