17
Operation
correct Polarization, Horizontal or Vertical, then save it.
4.2 Edit Transponder
Input the frequency value and symbol rate value by numeric key, choose the
correct Polarization, Horizontal or Vertical, and then save it.
4.3 Delete Transponder
Delete the transponder from the list, and press 0 to select all on the list.
Press EXIT button to save it.
4.4 Manu Scan
Pressing 0 on remote control you can
scan the current TP. The scan mode is
the same as satellite, Free; ALL;
Free+NIT; ALL+NIT.
5. System
With system menu, you can set whatever you want the features and
specifications of your STB to be most suitable for your watching programs.
5.1 TV Standard
To set TV standard by choosing AUTO; PAL and NTSC; strongly suggested to
set always AUTO.
5.2 Language
To select the preferred language by using ▲/▼ buttons.
5.3 Factory default
To default the factory settings,
5.4 System Update
To updated the software by modes of ALL, Code, Code & List, and LOGO.
To Next Page
Loading...
Need help?
General
