7.3.3 OSD settings
Info Bar Select the duration time for displaying the info bar on screen 5, 10, 15, 20 seconds. Also you
can select No timeout to keep the info bar continuously.
Transparency Select the level of transparency of menus on top of the live screen.
7.3.4 Parental Control
Parental Rating Select the age rating for which the PIN code shall be entered before watching a
parental rating protected channel. Select All to disable.
Channel Manager The channel manager menu is protected by the PIN code as default to prevent
that your channel list(s) are changed or even deleted by others. Select Off if you want to disable this
function.
7.3.5 Data Base Management
This menu allows you to make a backup or load a previously made channel list to a USB device.
Insert a USB stick (recommended) into one of the free USB slots.
Backup Backup the current channel list to a USB device.
Load Load previously made channel lists. The current one will be overwritten.
NOTE: You can make more lists as backup and load them later by selecting them
by date(s).
7.3.6 Recording settings
This menu allows you to setup settings for Timeshift and recordings to a USB device.
Insert a USB HDD into one of the free USB slots. Alternatively, you can use USB sticks but it must be
high speed and high capacity for recording of HD content.
Storage Select the USB device you like to use for the recording function.
Recording Duration The recording time is set to 3 hours as default. For changing this time, select your
default recording time. When you start a recording by pressing 4 you change this default time to
another. The next recording will show this default time.
Timeshift Default Timeshift time is set to No limitation. This means that during Timeshift the data
keeps writing to the USB device until you press 3. For limiting the size of data to prevent that the
whole space on your connected USB device is used you can select your maximum write time.
Auto Timeshift Select On to start Timeshift automatically right after channel switch. If you switch to
other channels, Timeshift will be available by the time you re-switch. Select Off to deactivate this
function.
7.3.7 System
This menu allows you to see the currently used software version of the DTV part and restore back to
the factory defaults.
Run on Start-up Select On for starting the DTV immediately after you power ON the box with main
power. Select Off to start in the Android mode.
19
To Next Page
Loading...
