Strong SRT 4930L User Manual

- Firmware update : Support download from a LAN.
⊹
BLUE button, appear input target IP address.
⊺
button to Scan after inputting a target IP.
⊻
Choose a update software and button for downloading.
⍢
Note : The PC tool STB Daemon must be installed on your PC before you can connect
your receiver the PC. Please refer to the “Connecting your receiver via LAN to a
PC” section for PC Tool download instruction
- SCAN : Press the button to SCAN for the IP address and network details
if they do not apprear automatically.
- WiFi Wi ard :
When connecting to your home network using WiFi press the button to
view the list of available wireless networks. Select the desired wireless network you wish to
connect to using the and arrow buttons and press the button to select your
- WiFi Setting : Once you have selected the wireless network you wish to connect to in the WiFi
<Figure 6.2.6>
6.2 System Setting
<Figure 6.2.7> <Figure 6.2.8>
6.2 System Setting
Wizard press the button to access the WiFi Setting menu. In this menu you can
enter the network key to connect to your wireless home network. HIghlight Key using the
and arrow buttons and press the button to bring up the virtual keyboard.
Using the , , and buttons select the characters of your wireless network security
and press the button. Once you have entered your wireless network key press the
button to save and exit. Now highlight connect and press the button to connect to your
z
network.
wireless network.
2625
Connecting your receiver to a PC via your Network
1. Follow these instructions prior to connecting your receiver to your PC:
a) Run the PC Tool program (STB Daemon) before connecting to your PC,
b) Click Browse and select a sharing folder on your PC.
c) Press “ ” then select STB Daemon and the window will be hidden. You can still see
the icon on bottom right of the windows screen.
2. Connect an Ethernet cable or wireless USB dongle from your SRT 4930L to your network port.
3. Press menu, Select System Settings, Select IP Settings:
b) If your Network supports DHCP, IP settings can be allocated automatically by turning
DHCP Usage on and pressing the colored key
this can be downloaded from www.strong.com.au/faq tech. html.
a) Depending on your connection select either Ethernet of WiFi.
<Figure 6.2.9>
RED
RED
GREEN
YELLOW
RED

Strong SRT 4930L Specifications

General

Brand	Strong
Model	SRT 4930L
Category	Receiver
Language	English