4
Safety inductions
1. It is recommended to read this User's Manual before starting the operation of the receiver.
2. Do not touch the power cord with wet hands as it may cause electric shock.
3. Never open the cover. It is very dangerous to touch the inside of the unit due to the possibility
of an electric shock.
4. Keep the unit in a well ventilated and cool environment.
5. When this unit is not in use for a long time, it is recommended to have the AC/DC adaptor
unplugged from the socket. Also a damaged power cord should not be used as it might cause fire
or an electric shock.
6. A professional installation is required. In case of any signal interruption, contact your local
service center / installer.
7. Place the unit horizontally. An uneven placement may cause the unit to be damaged.
8. Do not put heavy items such as a TV on the unit. This may damage the unit.
9. Do not expose the unit to water.
10. Do not place water containing items such as vase on the unit.
11. Do not install the unit:
•Where it is exposed to vibration.
•Where it is exposed to direct sunlight.
•Where there is humidity.
•Where the temperature is too high or too low.
•Where there is no ventilation.
12. Moving the unit from a cold environment to a hot one would cause some humidity to the
internal components. Do not operate the unit for one or two hours until components have dried-
up completely.
13. The main plug is used to disconnect device.
14. The disconnect device shall remain readily operational.
15. The socket-outlet shall be installed near the equipment and shall be easily accessible.
To Next Page
Loading...
