PART 1 • English
11
English
5.3.5 Timer Setting
In this menu you can set a programme timer or sleep timer.
Programme timer
Timer Number: You can set 8 timers
Timer Mode: Off/Once/Daily/Weekly/Monthly
Timer Service: TV Service/Radio Service
Wake-up Channel: You can select a desired channel as wake-up channel.
Month/Date/Day: Press pq buttons to select your desired month, date and day.
Time: Press OK to input the time with the numeric buttons.
When you want to quit programme timer, a saving window appears, with tu select
Yes in the confirmation window and press OK to save or select No to cancel.
Duration: Press OK to input desired duration with the numeric buttons.
Sleep Timer
You can set the receiver to power OFF in 10 min, 30 min, 60 min, 90 min and
120 min automatically.
5.3.6 OSD Setting
This menu allows you to change settings for: Subtitle Display, OSD Transparency, and
Load Default OSD Setting.
Subtitle Display: To set the subtitle to Standard or OFF.
OSD Transparency: To set the OSD transparency from Off ~ 50 %.
OSD Timeout: To define how long the information banner is to be shown (5S~10S)
Load Default OSD Setting: To clear all OSD settings and reset to default value.
5.3.7 Parental Lock
This menu allows you to protect the installation menu, or channels with a password
and you can change the Password. If you want to enter the menu you will be asked to
input the password (default: 0000).
Menu Lock: Locks the installation menu. You can set menu lock to ON/OFF.
Channel Lock: Off/Manual/Age:4 - Age:18
New Password: To change the password.
Confirm Password: To confirm the new password.
5.3.8 Auto Standby
This option allows you to enable or disable Auto Standby. The default setting for Auto
Standby is ON. The receiver will switch to standby automatically when it doesn’t
receive commands from the remote control for three hours. To avoid the automatic
switch off, set Auto Standby to OFF.
To Next Page
Loading...
