PART 1 • English
12
5.4 Tools
Press MENU button to enter main menu. Select “Tools” and press OK button to enter
tools menu.
1. Press pq buttons to highlight the desired menu and press OK
button to enter.
2. Press EXIT button to exit.
5.4.1 Receiver Information
This menu displays some Receiver information like Hardware, Software, Signature and
Remote Control and our Web site www.strong.tv.
1. In Tools menu, select “Receiver Information” and press OK button to open
receiver information window.
2. Press EXIT button to exit.
5.4.2 Game
This menu allows you to play games (Tetris, Snake and Othello) on this receiver.
1. Select “Game” in Tools menu and press OK button to enter game menu.
2. Press pq buttons to select a desired game, and press OK to enter the
game. Highlight “Start” and press OK to start the game. For changing
levels highlight “Setup” and use tu buttons.
3. Press EXIT button to quit the game
Note: You can also press OK button to pause playing
5.4.3 Load Factory Default
This menu allows you to reset the receiver back to factory settings, clear all existed channels.
Note: This option will delete all your settings and channel lists and set your receiver
to factory default!
1. Enter “Tools” menu, select “Load Factory Default” and press OK button,
you are asked to input password.
2. Input a correct password using the numeric buttons (the default
password is “0000”), a confirmation window is displayed.
3. Select “Yes” to return back to factory settings and clear all channels. Select
“No” to cancel.
4. Press EXIT button to exit.
5.4.4 Software Upgrade
1. Enter “Tools” menu, select “Software Upgrade” and press OK button,
Software Upgrade menu is shown.
2. Press pq buttons to select “Upgrade by Storage” item and press OK
button, you are asked to input password.
3. Input the correct password (the default password is 0000), Software
Upgrade submenu is opened. Then select the correct software file and
To Next Page
Loading...
Need help?
General
