PART 1 • English
5
English
nUser-friendly Remote Control
nNTSC/PAL converting automatically and manually
n3 Games (Tetris, Snake, Othello)
nDigital sound through coaxial output (S/PDIF) by connecting to
digital amplifier
nDVB-T compliant, UHF/VHF Tuner with Loop-through function
nSupport of active antenna by 5 V output
nPower saving automatic standby function
* Depending on local signal conditions; ** Availability depending on broadcaster
Accessories:
n1 User Manual
n1 Remote control unit
n2x Batteries (AAA type)
Note: The batteries should not be recharged, disassembled, electrically short-
circuited or be mixed or used with other types of batteries.
If rechargeable accumulators instead of batteries are going to be used, we
recommend using (e.g. NiMH) types with low self-discharge to ensure
long time operation of remote control.
2.0 CONNECTION
2.1 Connecting to TV and Terrestrial Antenna
To receive the broadcast signal, the terrestrial antenna cable should be connected to
the ANT IN connector at the back of the receiver. (Fig. 1)
2.2 Connecting to TV and VCR
The models SRT 5202 and SRT 5205 can be connected with a VCR using a SCART
cable. (Fig. 1)
2.3 Connecting to a Digital Audio Amplifier
Connect your Digital Audio Amplifier with the S/PDIF connector on the back of the
receiver (Fig. 1).
2.4 Connecting to RCA (Audio L/R, Video)
The model SRT 5205 can be alternatively connected to the TV set with the RCA cinch
connectors on the back of the receiver (Fig. 2).
3.0 YOUR RECEIVER
3.1 Front Panel
SRT 5205: LED Display and USB connector on front (Fig. 3)
To Next Page
Loading...
Need help?
General
