EasyManua.ls Logo

Strong SRT 56 - Timer Setting; Osd Setting; Parental Lock

Strong SRT 56
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
PART 1 English
Time Display: This menu allow to control whether the time is displayed on
screen or not. The options are: Off/On.
5.3.4 Timer Setting
In this menu you can set a programme timer or sleep timer.
Programme timer
Timer Number: You can set 8 timers
Timer Mode: Off/Once/Daily/Weekly/Monthly
Timer Service: TV Service/Radio Service
Wake-up Channel: You can select a desired channel as wake-up channel.
Month/Date/Day: Press pq buttons to select your desired month, date and day.
Weekday Use tu to select the day of the week for weekly timers.
Time: Press OK to input the time with the numeric buttons.
Duration: Press OK to input desired duration with the numeric buttons.
Auto Record: Use the tu buttons to adjust On or Off, depending if you want
Timer to activate recording via USB port.
Duration: Press OK to input desired duration with the numeric buttons.
Once you’ve made all settings, press EXIT. A saving window appears, with tu select
Yes in the confirmation window and press OK to save or select No to cancel.
Sleep Timer
You can set the receiver to switch to Standby in 10 min, 30 min, 60 min, 90 min and
120 min automatically. Additionally the Remaining Time is shown.
5.3.5 OSD Setting
This menu allows you to change settings for: Subtitle Display, OSD Transparency, and to
Load Default OSD Setting.
Subtitle Display: To set the subtitle to DVB, Teletext or OFF.
OSD Transparency: To set the OSD transparency from Off ~ 50 %.
OSD Timeout: To set the preferred duration for banner display from 5 s ~ 10 s.
Load Default OSD Setting: To clear all OSD settings and reset to default values.
5.3.6 Parental Lock
This menu allows you to protect the installation menu, or channels with a password
and you can change the Password. If you want to enter the menu you will be asked to
input the password (default: 0000).
Menu Lock: Locks the installation menu. You can set menu lock to ON/OFF.
Channel Lock: Off/Manual/Age:4 - Age:18
New Password: To change the password.
Confirm Password: To confirm the new password.

Related product manuals