11
PART 1 • English
English
5.3.7 Auto Standby
This option allows you to enable or disable Auto Standby. The default setting for Auto
Standby is ON. The receiver will switch to standby automatically when it doesnt receive
commands from the remote control for three hours. To avoid the automatic switch off,
set Auto Standby to OFF .
5.4 Tools
Press MENU button to enter main menu. Select “Tools” and press OK button to enter
tools menu.
1. Press pq buttons to highlight the desired menu and press OK button to enter.
2. Press EXIT button to exit.
5.4.1 Receiver Information
This menu displays Receiver information like Hardware, Software, Build Date and our
Web site www.strong.tv.
1. In Tools menu, select “Receiver Information” and press OK button to open
receiver information window.
2. Press EXIT button to exit.
5.4.2 Games
This menu allows you to play games (Snake and Othello) on this receiver.
1. Select “Games” in Tools menu and press OK button to enter game menu.
2. Press pq buttons to select a desired game, and press OK button to
enter the game. Highlight “Start” and press OK button to start the game.
For changing levels highlight “Setup” and use tu buttons.
3. Press EXIT button to quit the game
Note: You can also press OK button to pause playing
5.4.3 Load Factory Default
This menu allows you to reset the receiver back to factory settings, clear all existed channels.
Note: This option will delete all your settings and channel lists and set your receiver
to factory default!
1. Enter “Tools” menu, select “Load Factory Default” and press OK button,
you are asked to input password.
2. Input the correct password using the numeric buttons (the default
password is “0000”), a confirmation window is displayed.
3. Select “Yes” to return back to factory settings and clear all channels. Select
“No” to cancel.
4. Press EXIT button to exit.
To Next Page
Loading...
