EasyManua.ls Logo

Strong SRT 56 - First Time Installation; Main Menu; Channel Management

Strong SRT 56
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
PART 1 English
13. EPG Shows the EPG (Electronic Program Guide) in TV mode
14. Records the TV program to the USB-storage device
15. TIMESHIFT Activates the timeshift function
16. tt / uu Fast rewind / Fast forward
17. TTX Shows Teletext on OSD (On Screen Display)
18. TV/RADIO Toggles between TV and RADIO mode
19. AUDIO Shows list of the current audio channel /language
20. GOTO Only used to go to desired position in Record/Playback mode
21. COLOURED BUTTONS For Multimedia and Teletext functions
Fig. 7
The remote control transmits a directional infrared beam. Be sure to aim the remote
control directly at the infrared sensor of the unit during operation. If the sensor has been
covered or there is a large object between the remote control and the sensor, the sensor
will not receive the signal. The sensor may not able to receive the remote signal when it is
exposed to direct sunlight or a strong articial light (uorescent or strobe light). In this case,
change the direction of the light or reposition the unit to avoid direct lighting.
4.0 FIRST TIME INSTALLATION
If you use the receiver for the first time, the Easy Install menu appears. Use the tu
buttons to change settings for setup of Region, OSD Language and Antenna Power
and the pq to select. Then use the pq buttons to move focus to Search and press
OK to proceed with the automatic channel scan.
5.0 MAIN MENU
In viewing mode you can press MENU any time to enter the Main Menu. It consists of
following submenus: Channel, Installation, Setup, Tools and Media+
5.1 Channel
1. Use the pq buttons to select Channel and press OK to enter.
2. Use the pq buttons to highlight the desired item and press OK to select.
3. Press EXIT to exit.
Note: You can also press OK in TV mode to enter the channel list.
5.1.1 TV Channel list
1. In Channel submenu select TV Channel List with the pq buttons and
press OK to enter.
2. Use the tu buttons to change channel group (assumed you have
already set up Favourite groups).
3. With the pq buttons select the channel you want to watch. With OK you
can watch the selected channel in full screen mode.

Related product manuals