28
Signal level: -65 to -25 dBm
LNB power: 13/18 V DC (+/- 5%), max. 0.5 A, overload protected
Switch versions: DiSEqC 1.0, 1.1
LNB options: Universal, SatCR (max. 8 users)
Motor drive options: DiSEqC 1.2, GotoX (DiSEqC 1.3)
System & Memory
Main processor: MSTAR MSD7S01
Flash memory: 4 MB
System memory: 64 MB
Multimedia
Video playback: Supported in various formats (MPG, MPEG, VOB, MP4, AVI…)*
Audio playback: MP3, Flac*
Picture view: JPG, BMP*
*STRONG cannot guarantee the playback of files although extensions are listed, as it depends on codec used, data bit rate and resolution (all MPEG
codec formats are supported).
Connectors
SAT IN
RJ-45 – Ethernet
USB 2.0 port: 5 V/800 mA (max.) supported
HDMI
TV SCART (RGB, CVBS, Audio L/R)
3.5 mm Audio L/R
S/PDIF (coax.)
Power adapter (12 V, 1.5 A)
General Data
Power supply: AC 100 – 240 V ~ 50/60 Hz
Input voltage: DC 12 V 1.5 A
Power consumption: max. 18 W, typ. 5 W
Power consumption in standby: max. 1.0 W
Operating temperature: 0 ~ +40 °C
Storage temperature: -10 ~ +50 °C
Operating humidity range: 10 ~ 85% RH, Non-condensing
Size (W x D x H) in mm: 187 x 146 x 45
Weight in kg: 0.38
Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may
change. Manufactured under license from Dolby Laboratories. Dolby Audio, Dolby Digital, Dolby and the double-D symbol are trademarks of Dolby
Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries. All product names are trademarks or registered trademarks of their respective owners.
© STRONG 2016. All rights reserved.
To Previous Page
Loading...
