12
PART 2 • English
Press GUIDE button in viewing mode to access the EPG Menu. The screen is divided into 3 main parts: at the left side
the channel list is shown, at the right the program schedule list and in the upper part a short program description with
program start/end time of the current channel. With BACK you can always cancel actions and exit the actual menu or
submenu.
In channel list:
Use
pq to choose the channel. Furthermore you can use the RED/GREEN buttons to scroll through the channel list.
Use
tu to switch between the channel list and program schedule. If you press OK at a selected channel, the receiver
will switch to it.
In program schedule list:
Use
tu to choose the desired event information. By pressing GUIDE you can choose previous/next day of schedule.
Use YELLOW/BLUE buttons to scroll within the programme information text. Use OK button to program a timer for the
selected program.
Note Please consider that it might be necessary to switch to a desired channel in order to receive its
correct program information.
6.2 Zapping and INFO banner
In viewing mode press INFO button to see significant information for the current channel, such as the current channel
list mode, broadcast resolution, date and time, program info, satellite, transponder and symbol rate as well as the signal
strength and quality. At the upper right corner the HDMI resolution adjusted in receiver is displayed.
6.3 Channel list and viewing mode
Use the TV/RADIO button in viewing mode to change the channel list mode. You can choose between TV, RADIO and
All Channels mode. After changing the list, the receiver tunes to the first channel of the list.
In viewing mode press OK button to access the current channel list.
Depending on the mode you have chosen with the TV/RADIO button, you will see the according channel list. To select
channels you can use the
pq buttons, for scrolling use the RED/GREEN buttons. If you want to switch to a selected
channel, press OK once to stay in channel list mode. By pressing OK again, you will switch to viewing mode.
For the below functions use
pq buttons to choose the desired option from respective list, then press OK to apply this
action for the channel list. With BACK you can always cancel actions and exit the actual menu or submenu.
Sort:
Use the
tu buttons to choose the option Sort, which allows you to sort your channel list in following order:
Restore List: This function restores the list to the default order.
By Name: Sorts the channels in alphabetical order.
By Transponder: Sorts the channels from lowest to highest transponder.
By Scrambled: Sorts the channels from FTA (Free-To-Air) to Scrambled channels.
Filter:
Use the
tu buttons to choose the option Filter, which allows you to filter your channel list
Restore List: This function restores the list to the default order.
Free channels: Only FTA channels will be filtered out of the channel list.
Scrambled: Only scrambled channels will be filtered out of the channel list.
Satellite:
Use the
tu buttons to choose the option Satellite, which allows you to filter your channel list according satellite.
Depending on your installation and area you will have displayed available satellite/s in black letters; satellites which are
not scanned will be shown in white letters.
Note Please consider that sorting can be applied to desired satellite list, filtering can only be applied to all
channels list.
6.3.1 Favourite list
In viewing mode you can use the FAV button to switch to favourite mode, another switching will bring you to FAV
group and afterwards back to previous channel list mode. If you press OK in favourite mode the FAV channel list will be
displayed.
To Next Page
Loading...
