LEVELING UNIT / SHIMMING FRAME SUPPORT RAILS (REMOTE UNITS ONLY)
7
Leveling Unit / Shimming Frame Support
Rails (Remote Units Only)
Case must be leveled to assure proper operation.
Frame support rails may be shimmed to assure
that it is level.
Shims will be provided with such cases.
Illustration below shows case with frame support
rails.
Note: After case has been properly shimmed,
attach panels. No screws are required.
See next page for caster/leveler system
(self-contained units only)
Frame
Support Rail
Illustration Shown May Not Exactly
Reflect Every Feature or Option of
Your Particular Model
To Next Page
Loading...
