Stryker Crossfire - Adjusting User and System Settings; User Preference Customization

EN-21
Adjusting User and System Settings
User Preference Settings
User preferences, such as power and cutting speeds and button assignments for
the handpiece and footswitch, can be adjusted through the Crossre™ interface.
Select from the default settings provided with the console, or contact your
Stryker representative to customize your own.
1. Press
.
DEFAULT
SMITH SHLDR
SMITH KNEE
2. Press to select a
default setting.
3. Press
to conrm
selection and exit.
Or, press
to cancel
selection.
Note: User preference settings will not take eect unless a disposable attachment
is connected to the shaver.
Note: When using small-joint handpieces, system defaults will take eect (see
“Default Shaver Controls”). No user preferences can be applied.