EN-32
Audible Feedback
e Crossre™ Console will provide audible feedback for the following events:
Event Signal
During system startup
System self-test Two-second beep
Handpiece connected Single beep
Disposable attachment connected Single beep
Footswitch detected Single beep
RF probe detected Single beep
During use
RFCOAGmodeactive Continuous tone (low)
RF CUT mode active Continuous tone (high)
System error ree beeps
Force modulation on / o Single beep
Shaver reverse mode activated Five short beeps
Toggle (from footswitch) between RF
and Shaver
e console will say, “Shaver” or
“SERFAS”
To Next Page
Loading...
