EN-28
Shaver Hand Controls
1
2
3
Default 1 Default 2 /
None
Default 3
1. Oscillate
(one-touch)
Activate Oscillate
(one-touch)
2. Forward
(one-touch)
Select Mode:
Oscillate
or Forward
/Reverse
Jog
3. Reverse
(one-touch)
Forward/
Reverse
Forward
(one-touch)
Using the Footswitch
e RF and shaver handpieces can also be controlled by the Crossre™
Footswitch. e default footswitch controls are shown below. To customize
button assignments, contact your Stryker representative.
Note: For more detailed information on the Crossre™ Footswitch, consult the
Crossre™ Footswitch User Guide (English: 1000-401-032; International: P11345).
Note: To keep the footswitch clean during use, Stryker recommends using
disposable bags (P/N 0277-500-100). Contact your local Stryker representative
for ordering information.
To Next Page
Loading...
Need help?
General
