Stryker GOLD - Page 22

Litter Assembly with Scale System
21
Item Part No. Part Name Qty.
A 0003−355−000 Hex Hd. Cap Screw 6
B 0003−356−000 Hex Hd. Cap Screw 2
C 0003−357−000 Hex Hd. Cap Screw 2
D 0003−358−000 Hex Hd. Cap Screw 4
E 0007−071−000 Truss Hd. Mach. Screw 2
F 0004−330−000 Socket Hd. Cap Screw 4
G 0007−058−000 Torx Screw 4
H 0013−010−000 Ext. Tooth Lock Washer 1
J 0014−021−000 Washer 8
K 0015−027−000 Hex Jam Nut 4
M 0016−11 7 −000 Hex Lock Nut 4
N 0016−11 8 −000 Hex Lock Nut 16
P 0023−282−000 Phillips Hd. Self−Tapping Screw 2
R 0023−283−000 Phillips Hd. Self−Tapping Screw 4
T 0023−288−000 Hex Washer Hd. Screw 2
U 0025−040−000 Rivet 20
V 0025−122−000 Rivet 2
W 0025−172−000 Rivet 4
Y 0028−072−000 External Snap Ring 2
AA 0037−059−000 Hole Plug 2
AB 0721−031−065 Hole Plug 48
AC 0926−400−142 Bumper Wheel 4
AD 1001−040−012 Foot Board Receptacle 2
AE 1070−010−021 Trend Supt. Bracket, Right 1
AF 1070−010−022 Trend Supt. Bracket, Left 1
AG 1070−010−041 Trend Cross Support 1
AH 1070−012−011 Fowler Cross Supt. Bracket 1
AJ 1070−017−011 Head End Load Cell Bushing 2
AK 1070−017−012 Foot End Load Cell Bushing 2
AL (page 101) Head End Lift Header Assembly 1
AM (page 102) Foot End Lift Header Assembly 1
AN 1070−037−902 Display Template Label 1
AP (page 107) Scale Display Assembly 1
AR 0660−001−018 660 Lb. Max. Label 2
AT 1211−030−018 Jack Support Bracket 2
AU 1211−030−034 Corner Cover, Hole/Slot 1
AV 1211−030−037 Corner Cover, Hole/Slot 1
AW 1211−030−044 Bumper Channel 2
AY 1211−030−046 Foley Bag Rack 2
BA 1211−031−031 Pneumatic Fowler Rest 2
BB 1211−351−004 Push Handle Bracket, Left 1
BC 1211−351−006 Push Handle Bracket, Right 1
BD 3000−300−113 Cable Tie 17
BE 1070−037−903 Specification Label 1