Scale System Operation
6
SCALE SYSTEM BATTERIES
NOTE
To avoid completely draining the batteries and having the optional scale system shut down, replace the batter-
ies whenever only one of the charge indicator bars on the display is black (see page 5 for an example).
1. Remove the two Phillips head screws holding the battery compartment cover on the display assembly.
2. Replace all four AA batteries, being sure to install the positive and negative poles as indicated on the
battery holder. Standard alkaline batteries are recommended. Do not mix old and new batteries or mix
different types of batteries. Properly dispose of the old batteries in accordance with local regulations.
3. Reinstall the screws and the cover.
If the display is flashing “Lo Batt”, the batteries are drained and the scale system is disabled. Replace the
batteries with four new AA batteries as described above.
To Next Page
Loading...
Need help?
General
