Name: Stryker InTouch
Brand: Stryker
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Zoom Drive

1. Unplug bed from the wall. Use the two yellow hooks

located just below the drive handles to wrap the power

cord when unplugged.

2. Ensure the surrounding area is clear of any devices or

other persons.

Disengage brake by pressing the Neutral button.

Engage the Drive system upon exiting the room or

confined space by pressing the Drive button.

Press on the yellow triggers on the underside of each

Zoom handle, observe and wait for the indication light to

change from orange to green, signalling the drive

system is engaged and you are ready to Zoom.

6. Apply minimal forward or reverse motion when driving

the bed.

7. Gently move handles in the direction you wish to turn

the bed.

8. To stop the bed while in drive, release grip from the

yellow triggers.

Disengage drive by pressing the Neutral button or by

pressing the Brake button.

2131-029-001 InTouch Ops Guide Rev A.indd 72131-029-001 InTouch Ops Guide Rev A.indd 7 5/6/2009 4:29:14 PM5/6/2009 4:29:14 PM

Questions and Answers:

Need help?

Do you have a question about the Stryker InTouch and is the answer not in the manual?

Stryker InTouch Specifications

General