Stryker InTouch - Manual CPR for XPRT or Positionpro

Manual CPR for XPRT or PositionPRO
To release:
Pull one of the two CPR cords. One cord is located on each
side at the head end of the surface.
All functions will stop and the mattress will go flat.
A message will appear on the touch screen indicating
CPR activation.
To reset:
Re-insert CPR plugs. Screen will automatically reset.
2131-029-001 InTouch Ops Guide Rev A.indd 92131-029-001 InTouch Ops Guide Rev A.indd 9 5/6/2009 4:30:08 PM5/6/2009 4:30:08 PM