Stryker LUCAS 3 - Step 5: Assigning New Setup Options

Page 12
Step 5: Assigning new setup options
If you dened the LUCAS device setup options in your LIFENET account prior to the
Wi-Fi conguration (see step 2 in this Guide) and the ”Assign as default prole for new
devices” box was checked:
• All LUCAS devices that are registered and have checked in to this account
will get the default prole automatically.
If no setup options prole was created prior to Wi-Fi conguration, or if the box
for ”Assign to as default prole to new devices” was not checked, do following to
create a new setup options prole:
1. Follow Step 2 “Dening LUCAS device setup options” in this Guide.
2. Select the LUCAS device/s you want to apply this setup prole to (registered
LUCAS devices will be visible in navigation step 8 ”Assign to Devices”).
Assign devices
Back to contents