Stryker LUCAS 3 Implementation Guide

Page 2
• Follow on-screen steps to change your LUCAS device Setup Options
using the drop down menus.
NOTE: The LUCAS device is delivered with factory default settings and the existing name for
this setup options prole is ”LUCAS 3 – 3.1 – Default Prole”. You can change the setup
options prole name in navigation step 1 (see above image).
• Hover over the elds for additional information.
NOTE: LUCAS factory default settings are in bold.
• You may need to scroll
the drop down menu
to see all setup options.
Back to contents

Stryker LUCAS 3 Specifications

General

Device Type	Chest Compression System
Power Source	Rechargeable Lithium-ion Battery
Compression Depth	5.3 ± 0.2 cm (2.1 ± 0.1 in)
Battery Life	45 minutes of operation
Battery Charge Time	Approximately 4 hours
Operating Modes	Pause
Patient Size	Fits most adult patients
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	–20 to +60 °C (–4 to 140 °F)
IP Rating	IP43
Compression Rate	100 compressions per minute